Enertrols Soft Pads (shown installed on a 3/4"-bore Gold Line™ Primary Mount shock absorber) are available in five sizes t ofit securely over the piston rod button of all 3/8", 1/2" 3/4", 1 1/8" and 1 1/2" bore-size models. They are made of tough, long-wearing polyurethane to reduce noise and/or marring of the object impacting on the steel button.
Enertrols Standard Mounting Plates and Brackets save time and money by reducing design and fabrication costs whenever you have an installation requiring them. They are used with Primary Mount shock absorbers to assure correct mounting structure thickness and location of all mounting holes. Finish machined both sides for exact dimensional positioning. Available to fit all primary 1/2", 3/4" and 1 1/8" bore sizes.
Shown here is a Gold-Line™ shock absorber secured in a standard Mounting Bracket by an ENERTROLS Mounting Stop Collar (MSC™). An optional ENERTROLS Retaining Kit insures that the work-positioning point of the positive stop will not be lost due to improper installation or tampering.
Enertrols Air-over-Oil Tanks (AOT) are available in the four stock sizes shown for use with all ALD and ALDS models 1/2" through 4"-bore sizes. The three largest tanks are made of high-strength steel, use no soft seals and have easy-to-read sight gauges.
Enertrols Tow Bar Snubber is a 2 1/2" bore, non-adjustable pneumatic shock absorber specially adapted for use on high-speed material handling systems. The higher speeds being used on today's power and free handling systems greatly increase the potential for both product and/or system damage due to the rapid acceleration/deceleration speeds generated.
TheTow Bar Snubber is designed to absorb and smooth rapid acceleration/ deceleration when starting and stopping. This prevents stretching and compressing load conditions to reduce maintenance and increase "up-time" of the material handling system. The unit will handle conveyor speeds up to 80 feet/minute with loads up to 6,000 Ibs, maximum. Tensile load limit is 40,000 pounds. Enertrols Tow Bar Snubbers are available in 4" and 6" stroke lengths. They feature high-temperature seals, extra-long rod bearings and strong chrome- plated piston rods. These units are easily repaired in the field.
The Enertrols Reverse Snubber (Pat. Pend.) is installed with the clevis end of the piston rod fastened to a fixed point. The opposite end of the body is clevised to the moving load and moves with the load as the piston strokes. This eliminates piston rod boots and covers to prevent contamination damage to the rod.